Generator SET

A Generator set has five systems. for a good condition of a generation of electricity, they should maintenance properly.

• Starting System

• Fuel System

• Exhaust air System

• Lubrication oil System

• Cooling System

Earthing System

Panel boards are selling several Countries then earthing systems and main Bus bar arrangement are changed each country.

Type of System Earthing

01. TN system:

TN power system have one point directly earthed, the exposed conductive parts of the installation being connected to that point by protective conductors. Three types of TN systems are recognized, according to the arrangement of neutral and protective conductors,

(a) TN-S System – A system having separate neutral and protective conductors throughout

(b) TN-C-S System – A system in which neutral and protective function are combined in a single conductor in a part of system.

(c) TN-C system - A system in which neutral and protective functions are combined in a single conductor throughout.

02. TT System -

The TT power system has one point directly earthed, the exposed conductive parts of the installation being connected to earth electrodes electrically independent of the earth electrodes of the power system,

03. IT System -

The IT power system has no direct connection between live parts and earth, the exposed conductive parts of the electrical installation being earthed

Panel Designing

Panel designing process we need following details. Because panel is depended in these conditions.

· The "Form Type"

· Degree of protection (IP)

· Panel Colors

· Earthling System

· Short Circuit Time Duration

· Fault Current

And Single line diagram or bill of materials (Number of incoming and outgoing feeders) details.

Types of Compressor

A compressor converts the mechanical energy of an electric or combustion motor into the potential energy of compressed air. Air compressors fall into two main categories Reciprocating and Rotary.

01. Piston type Compressors

02. Screw type Compressors

Emergency stop and mushroom head push button.

There are many types of emergency push button are available.

1) Trigger action push-pull

2) Trigger action turn to release.

3) Trigger action key release

Thermal Overload Relay

Thermal overload relay is a one of the protective device, which protects the load [motor] from overload. There are many sizes are available. Also so many setting ranges are available. This setting time is depends on the rated current of the motor.

It has 3 no of power controlling poles and also has two auxiliary contact points such as normally open and normally closed.

1. Overload protection.
2. Unbalance current tripping protection

UVT COIL

UVT coil (Under Voltage Trip)

UVT coil is normally close point. When de-energized the coil MCCB will be trip. UVT coil is used to detect the phase.